Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 42

LED Green Blinking = Battery Used

LED Yellow Blinking = Battery has 10 minutes of run time remaining

LED Red Blinking = Battery has 5 minutes of run time remaining

LED Constant Red = Battery Discharged

Remaining batteries will have a steady LED on module.

When current battery reaches 4% charge, the battery module will automatically switch over to another

battery, by default the LOWEST charge capacity battery of the remaining batteries installed in the Module.

Battery location and status are displayed in the lower UI. In this case RM B1 (Rear Module, Bay 1).

Battery location and status are also displayed on REDMOTE. In this case RM B3 (Rear Module, Bay 3).

Power Status on REDMOTE

The POWER menu also shows all installed batteries and their state of charge.

Power Menu