Specifications

RED EPIC OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC 955-0002_v4.0, Rev-A | 30
DUAL BATTERY MODULE
The DUAL BATTERY MODULE holds up to 2 REDVOLTs
Batteries may be hot swapped
Dual Battery Module
Shown with REDVOLT Batteries
Installed
MODULE INSTALLATION / REMOVAL
To install a DSMC Module to the camera, an Adaptor Plate must be purchased separately. The following
procedure details installation of the Adaptor Plate and DSMC Module.
Install the Adapter Plate
1. Power down the camera.
2. Remove the REDMOTE.
3. Place the adapter plate over the v-mount on the rear of the camera brain.
Place the Adaptor Plate Over the V-Mount on the Rear
of the Camera Brain