Specifications

RED EPIC OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC 955-0002_v4.0, Rev-A | 242
6. Set the camera to Magnify. Go to SECONDARY MENUS > SETTINGS > DISPLAY > FALSE COLOR >
MAGNIFY.
NOTE: The “Focus” option located under SECONDARY MENUS > SETTINGS > DISPLAY > FALSE COLOR >
FOCUS can serve as a good double-check for proper focus during this procedure.
RED Focus Displayed Image on Camera
7. Insert a T-10 Torx screwdriver into the back focus adjustment screw. The screw is oriented at
approximately 80° as shown.
Performing Back Focus Adjustment
8. Carefully and slowly, rotate the back focus adjustment screw to achieve optimum focus.
A. Turning CLOCKWISE moves the sensor forward.
B. Turning COUNTER-CLOCKWISE moves the sensor rearward.
NOTE: The center of the image will never be in perfect focus as the lines are less than 1/3 of a pixel in size.
9. The back focus adjustment mechanism is self-locking, and does not require a supplementary locking
screw.
10. Install the screw-in plug in the back focus adjustment opening using a T-10 Torx screwdriver.
11. This completes the back focus adjustment.
APPENDIX L: TROUBLESHOOTING