Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 226

For example, if Master is set to LEFT and Slave is set to RIGHT and both Cam IDs are set to S, the first clip

recorded by this stereo camera configuration will be:

Master:

S001_L001_0503B6.R3D

Slave:

S001_R001_0503R7.R3D

Where 0503 represents 05 March, B6 and R7 are examples of camera generated wildcard characters.

Note: If both Master and Slave cameras are accidentally left in default settings of CENTER and CAM A ID,

the clips recorded on each camera will have the same file structure, with the exception of the camera

generated wildcard characters which protect against exact file name duplication:

Master: A001_C001_0503B6.R3D

Slave: A001_C001_0503R7.R3D

CONNECTING CAMERAS

While still powered up, interconnect the cameras using a Master/Slave GIG-E Cable P/N 790-0163. Plug

the cable into the GIG-E connector on the rear of each camera body.