Specifications

RED EPIC OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC 955-0002_v4.0, Rev-A | 219
2. If connecting for the first time, a RNDIS/Gadget driver will be installed on the system
3. When the driver is installed, the battery charge indicator will flash on the REDMOTE
NOTE: If the REDMOTE will not connect to the PC, please refer to the read_me_installing_redmote_vX.X.XX
file in the REDMOTE_Firmware_vX.X.XX folder for manual setup of network connection instructions or
contact RED SUPPORT for assistance (http://www.red.com/contact_us).
4. Open the REDMOTE_update program from the Start Menu folder you created the shortcut for
5. Click on Connect to establish communication between the REDMOTE and REDMOTE_update
6. Connection is Established With REDMOTE will be displayed when connected. If the connection is not
established, then disable all internet connections and try again.
7. Proceed to Upgrade REDMOTE Firmware (Windows) on 219.
UPGRADE REDMOTE FIRMWARE (WINDOWS)
The following information will guide you through proper updating of your REDMOTE firmware.
1. Download and save the REDMOTE_Firmware_vX.X.XX.zip file located at
http://www.red.com/support
.