Specifications
RED EPIC OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC
955-0002_v4.0, Rev-A | 217
NOTE: Pairing of the REDMOTE may not be necessary after upgrading the REDMOTE firmware, however,
after upgrading the camera firmware you must pair the REDMOTE again.
UPGRADE REDMOTE (WINDOWS)
INSTALL REDMOTE UPGRADE UTILITY (WINDOWS)
The REDMOTE Upgrade Utility allows you to upgrade the firmware on your REDMOTE.
NOTE: After firmware has been upgraded through the REDMOTE Upgrade Utility, the REDMOTE must be
paired to the camera again.
1.
Download the DSMC_Resources_vX.X.zip file located at
http://www.red.com/support.
2.
Uncompress the zip file.
3.
Open the DSMC_Resources_vX.X folder.
4.
Open the Win folder.
5.
Open REDMOTE_upgrade_setup.exe.
6.
Click on Extract all.
7.
Select a destination and extract files.
8.
Click on Extract.
9.
Open the DSMC_Resources_vX.X folder.
10.
Open the REDMOTE_Upgrade_Utility folder.
11.
Open the Win folder.
12.
Open the REDMOTE_upgrade_setup.exe.
NOTE: If you receive an error when attempting to install the REDMOTE Upgrade Utility, right click on the
setup file and select Run as Administrator to proceed.
13.
Select I Agree to the License Agreement.