Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 207

REDMOTE SETUP: SOFT MENU BUTTON 3

When pressed, SETUP provides the option of forcing the REDLINK wireless link ON or OFF and selecting the

following REDMOTE Setup menu.

Adjustable parameters include LCD screen brightness; beep speaker Volume and Auto Shutdown time. In the

lower section of the display is the MAC address and the current firmware build of the REDMOTE

Brightness

The BRIGHTNESS control adjusts the LCD backlight intensity. Set value to maximum for daylight visibility,

set value lower for nighttime operation or for maximum battery run time when operating in wireless mode.

Default value is Maximum.

Volume

The VOLUME control adjusts the loudness of the beep speaker. As you adjust this value the REDMOTE will

beep the speaker to give an audible confirmation of the selected volume. Default value is Minimum.

Auto Shutdown

The AUTO SHUTDOWN control adjusts the amount of time a REDMOTE will continue to operate when in the

wireless mode after no detected activity (i.e. no button presses are detected) before powering down.

Default value is OFF (REDMOTE will operate continuously until manually powered down.)