Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 205

REMOTE

Allows the user to adjust camera settings from REDMOTE, by navigating the camera menus appearing on the

VIEWFINDER output of the camera, with summary data only appearing on the REDMOTE LCD

LOCAL

Allows the user to adjust camera settings from REDMOTE, by navigating camera menus appearing on the

REDMOTE LCD, with summary data only appearing on the VIEWFINDER output of the camera.

CUSTOMIZING LOCAL MENUS

When operating in LOCAL mode, REDMOTE provides the user the option to configure which parameters to

display in each of the parameter status windows. You can assign the parameters to one of the 5 pages of

information available under Soft Menu Buttons 4-8.

To customize parameters:

Ensure camera is ON and wirelessly connected to REDMOTE.

If Soft Menu Button 2 reports as REMOTE, press it once so it reports LOCAL.

Select the Soft Menu Button page you would like to set the parameter on from the right hand side of the

LCD. Refer to SOFT MENU BUTTONS 4-8.

Use the directional arrows on the Navigational Control to move the Red cursor to the desired location

within that page to place the parameter.

Now press SETUP: Soft Menu Button 3.