Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 203

CANCEL

If you wish to exit the CONNECT menu at any time press CANCEL.

DISCONNECT

To stop communicating wirelessly with the camera, select Soft Menu Button 1 Connect, then select

DISCONNECT and press the ENTER key in the Navigation Group.

RECONNECTING IF SIGNAL IS LOST

On loss of wireless communication REDMOTE will scan for the camera it was last paired with.

If the REDMOTE is unable to re-connect after 30 seconds, it will enter the manual SCAN menu, follow the

procedure outlined about to scan and identify camera(s) that you wish to connect to.