Specifications

RED EPIC OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC 955-0002_v4.0, Rev-A | 198
UNDOCKING
1. Depress the two latch release buttons located on each side of the REDMOTE.
2. Slide the REDMOTE upward to release from the V-Mount of the camera Brain / rear most module.
3. Remove the REDMOTE.
POWER UP / DOWN
Located on the upper right side of the REDMOTE is the Power / Key Lock Switch (refer to CONTROLS).
POWER UP
CONNECTED TO CAMERA
If the REDMOTE is physically attached to a camera, when the camera is powered up the REDMOTE will
automatically power up along with the camera.
NOT CONNECTED TO CAMERA
To manually power up the REDMOTE, slide and hold the Power / Key Lock Switch in the down direction for 2
seconds, then release.
POWER DOWN
USING CAMERA
When REDMOTE is connected to the camera and the camera is powered down, the REDMOTE will also
power down. When disconnected from the camera, the REDMOTE will not power down with the camera.
USING REDMOTE
To power down REDMOTE, slide and hold the Power / Key Lock Switch in the down direction for 5 seconds.
Or slide and hold the Power / Key Lock Switch in the down direction momentarily, then release. A screen will
display with options to power down the REDMOTE, the Camera, or REDMOTE and Camera together. Select
the desired option and press the ENTER key in the REDMOTE Navigation Group.