Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 197

POWER / KEY LOCK SWITCH

If the REDMOTE is powered OFF, moving and holding the switch in the down (POWER) direction for 2

seconds will power UP the REDMOTE and if the REDMOTE is powered ON, moving and holding the switch in

the down (POWER) direction for 5 seconds will power DOWN the REDMOTE.

Moving the switch to the up (LOCK) position will lockout all REDMOTE buttons to prevent unintentional

operation. When in the LOCK position, KEYS LOCKED will be displayed in red text above the SOFT MENU

BUTTONS 1-3 on the REDMOTE LCD display.

USB POWER PORT

The USB port may be used to charge the REDMOTE internal battery from a suitable USB power source.

Refer to CHARGING / BATTERY LIFE > CHARGING USING USB CONNECTOR for complete information.

OPERATION

DOCKING AND UNDOCKING

This section describes how to physically dock / undock the REDMOTE to / from the camera Brain or the

back of the rearmost expansion module.

DOCKING

Place the female V-Mount of the REDMOTE over the male V-Mount of the camera Brian or rearmost

module.

For Illustration Only, Rear

Surface of REDMOTE Should

Face Towards Camera

Slide the REDMOTE down until a click is heard which indicates the REDMOTE is securely attached.