Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 179

DC IN (POWER INPUT)

The 6-pin LEMO connector accepts DC input power between +11.5 V and +17 V DC. Power conditioning

provides protection against reverse-polarity connection, ESD, under and over voltage, and over current.

View into DC IN Power Input Connector

Mating Connector: LEMO FGJ.1B.306.CWLD72Z

SIGNAL

DESCRIPTION

+VBATT

Power input, +11.5 to +17 V DC

SCL-BATT

Serial Battery Bus Clock

GROUND

Power Return (Camera Ground)

SCA-BATT

Serial Battery Bus Data

WARNING: It is very important that both pairs of +VBATT and GROUND pins are wired up. DO NOT

fabricate power cables with just one each of +VBATT and GROUND pins wired, as this may cause damage to

the camera’s power supply; this is not covered by Warranty.

NOTE: Two pre-fabricated DC Power input cables are available from RED Digital Cinema.

P/N 790-0138 – DC Power – REDBRICK

QUICKPLATE to Camera – 18 in. (0.5m)

P/N 790-0164 – DC Power – XLR to Camera – 10 ft. (3m)