Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 176

For example, when GPI trigger is used for Record Start / Stop.

Start Record: On Ground to 3.3 V transition

During Record: Hold at 3.3 V

Stop Record: On 3.3 V to Ground transition

During Stop: Hold at Ground

TRIGGER BUTTON CIRCUIT

NOTE: A pre-fabricated SYNC interface cable is available from RED Digital Cinema.

P/N 790-0154 – Video Sync – Camera to 3 BNC – 3 ft. (1m)

White BNC: Shutter Sync / GPI

Yellow BNC: SMPTE Timecode

Green BNC: RS170A Genlock