Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 147

Factory

This is the calibration map generated during production. This map is always present and selected as default

on first use after performing a system restore under SETTINGS > MAINTENANCE > RESTORE SYSTEM.

User HS

The user can select the CURRENT CALMAP. The dialog only shows the calibration maps stored in memory

(FACTORY and USER HS in this case).

BLACK SHADING (DEFAULT)

This option uses fixed settings which are the same used for the factory calibration (around 23 Deg C). After

calibration (which takes about 15-20 min), the new map is automatically selected.

BLACK SHADING (CURRENT FPS/EXPOSURE SETTINGS)

This option generates a calibration with the currently set frame rate/exposure. This can be used to generate

a calibration for long exposures. After calibration (which takes about 15-20 min), the new map is

automatically selected.