Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 140

To pair the DSMC with REDMOTEs wirelessly, select SCAN FOR REDMOTES. The DSMC scans for any

REDMOTEs that are turned on with REDlink wireless enabled. The available wireless REDMOTEs appear in

the left panel. Use the PAIR and UNPAIR buttons to select and pair/ unpair REDMOTEs.

REDLINK CHANNEL

The REDlink Channel field lets you change the communication channel for the REDLink wireless connection

in the event of interference from other wireless devices.

REDLINK ENABLE

Select the REDLINK ENABLE checkbox to allow the DSMC to produce a wireless signal. Deselect the

checkbox to disable wireless. Be sure to disable wireless in any setting in which the wireless signal could

interfere with other devices, such as in a helicopter.

GPIO / SYNC

SYNC

Sensor Sync Mode allows the shutter timing (scan start) to be synced to an external signal.

Available options are: Off, Genlock, and MoCo. Default is Off.

Sources include the Brain and the Rear Module. Default is Brain.