Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 139

Master

Slave

DHCP

If a DHCP-server is available in the

communications network the DHCP option can be

checked and the camera will obtain an IP Address,

Subnet Mask and Gateway address automatically

from the DHCP -server.

C2C

If the camera-to-camera (C2C) check box is

checked, changes to the settings on this camera

will be sent out via the network as UDP packets as

a SET command (Which then sets the property on

other cameras). SET commands sent to this

camera will not be propagated.

EXT

If the EXT check box is checked this camera can

be controlled via TCP/IP from an external device.

IP Address

Permits the user to adjust the camera’s static IP

address.

Netmask

Permits the user to adjust the Subnet Mask

address.

Gateway

Permits the user to adjust the Gateway address.

REDMOTE

PAIR REDMOTES

A REDMOTE that is docked to the DSMC is automatically paired with the DSMC. The MAC address of a

locally attached REDMOTE is displayed in brackets.