Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 137

NOTE: Enter time in 24-hour clock format. i.e. 2:35 pm should be entered as 14:35:00.

COMMUNICATION

Communication Menu allows you to set a unique identification for the camera (or a group of cameras) when

operating in command and control communications network. Parameters are NAME, GROUP, TARGET, set a

SERIAL PROTOCOL, ENABLE DHCP, C2C or EXT, IP ADDRESS, NETMASK and GATEWAY. Using the serial

port or a direct Ethernet interconnect, two cameras, or one camera and one external device can be

connected. If the camera is connected via Ethernet to a hub or router, multiple cameras and devices can

communicate to each other.

NAME

Allows the user to create a unique camera NAME used in network communications

NOTE: The camera name field is limited to 8 characters.

GROUP

A camera can also be identified as a member of a GROUP of devices. (For example, a group "3DRIG_A"

could include two cameras "CAM_A_L" and "CAM_A_R"). The default group is named "DEFAULT". Group

names (like camera Names) can be used to uniquely address commands to a specific group of networked

cameras. Note: the group name is limited to 8 characters, default name is DEFAULT.