Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 134

PRE-RECORD

When enabled, the Pre-Record setting continuously captures a cache of footage before you start recording.

You can select to have 4-30 seconds (incremented at an interval of 2 seconds) of pre-record time added to

your actual footage. When Pre-Record is enabled, you won't miss the start of a shot by being a little slow on

the trigger.

To enable Pre-Record, you can do any of the following:

Select the ALWAYS TRIGGER PRE-RECORD BEFORE RECORDING check box

Click TRIGGER PRE-RECORD NOW

Map Pre-Record to a key (SETTINGS > SETUP > KEYS > RECORD: START PRE-RECORD)