Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 130

While recording in this mode, you can see how many frames you’ve recorded out of the total amount of

frames on the overlay.

SPEED RAMP MODE

This mode lets you program the framerate to transition to a target framerate during an interval.

Set the recording to end at a predefined frame limit by configuring the Limit Recording to fields

(optional).

Set the TARGET framerate.

Set the DURATION. This is how long it will take the camera to transition from your current framerate to

the target framerate.

Program a key to start the speed ramp (SETTINGS > SETUP > KEYS > RECORD: START SPEED RAMP).