Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 129

INTERNAL TIMELAPSE TIMER AND EXTERNAL FRAME TRIGGER

These timelapse modes allow you to set the recording to end at a predefined frame limit by configuring the

Limit Recording to fields. You can also set a specific amount of frames to be captured during an interval

between 1-3,599 seconds (in Internal Timelapse Timer mode) or during a pulse of the trigger (in External

Frame Trigger mode).

In Internal Timelapse Timer mode, the trigger is the REC key or any key that is programmed to start

recording. In External Frame Trigger mode, the trigger is any key that is mapped to the action RECORD:

EXTERNAL FRAME TRIGGER.

For example, in Internal Timelapse Timer mode, you can choose to record a total amount of 1000 frames,

and take 1 frame every 4.67 seconds. After you’ve recorded 1000 frames (which will take 4,670.00 seconds),

the recording process will stop.