Specifications

RED EPIC OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC 955-0002_v4.0, Rev-A | 123
TIME CODE SOURCE
Selects the TIME CODE source to be used. Available options are USER PROVIDED, EXTERNAL: BRAIN, and
EXTERNAL: REAR MODULE.
TIME CODE SOURCE
MODE
COMMENTS
User Provided (Internal)
Real Time Clock (RTC)
When selected the camera uses the cameras Real Time Clock as
the time code counter source (snapshot of the RTC.)
Set Manually
When selected allows the user to define a custom value as the
time code counter seed.
The three numerical boxes below allow you to set hours,
minutes and seconds (in that order).
External: Brain
Varies by device
Uses the time code from an external device connected to an
input on the camera brain
External: Rear Module
Varies by device
Uses the time code from an external device connected to an
input on a rear module such as the RED PRO I/O MODULE
Time Code and HANC data
The time code displayed becomes the primary time code HANC data while the other time code is sent as
secondary.
SLATE
When selected, a new dialog box will appear allowing you to add properties to the media highlighted in the
Current Media box when formatting. Available options are CAM ID, CAM POS and SET to set the values
entered.
Auto-Incrementing Take
If there is a value entered in the Scene box, the camera will automatically increment the take number every
time the camera starts and stops recording.
NOTE: The scene name is limited to eight characters.
Scene Information