Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 107

ZEBRA 1

To enable, select ZEBRA 1 check box. Areas of the image exposed within these ranges will be indicated by

crosshatched overlays at - 45 degrees relative to vertical. Zebra 1 is shown in the image below.

High IRE

Change the desired setting between 93 and 109 (default is 108).

Low IRE

Change the desired setting between 75 and 107 (default is 99).

ZEBRA 2

To enable, select ZEBRA 2 check box. Areas of the image exposed within these ranges will be indicated by

crosshatched overlays at + 45 degrees relative to vertical. Zebra 2 is shown in the image below.

High IRE

Change the desired setting between 1 and 99 (default is 47).

Low IRE

Change the desired setting between 0 and 84 (default is 44).