Instruction manual

Build 31 v31.6.16 Beta

144 144

Slave clips are labeled "R", if Master is set to RIGHT, Master clips are labeled "R" and Slave clips are la-

beled "L".

Under SYSTEM MENU CONTROLS > PROJECT MENU > SLATE > CAMERA, when using Master / Slave

camera configuration, the Slave camera is forced to use the Master camera's ID, rather than using its

own.

NOTE: ****** are wildcard + day + date

If Master is LEFT and its camera I.D letter is B, the first clip recorded will be:

- Master: B001_L001_******.RDC

- Slave: B001_R001_******.RDC

If Master is RIGHT and its camera I.D letter is B, the first clip recorded will be:

- Master: B001_R001_******.RDC

- Slave: B001_L001_******.RDC

If Master is CENTER and its camera I.D letter is B, the Slave will also be CENTER and the first clip record-

ed will have the same file structure with the exception of the wildcards:

IMPORTANT: This position is NOT recommended when recording in Master / Slave configuration.

- Master: B001_C001_******.RDC

- Slave: B001_C001_******.RDC