Technical data

Version 3.0

40 40

NOTE: Once powered up, if the Power Status LED illuminates Red, it indicates low remaining

battery capacity and a battery exchange or switch over to external DC power is recommended.

POWER DOWN

The camera can be powered down in two ways:

1. Using REDmote or Side Handle Menu controls, or via Touch Screen LCD icons. Refer to SECONDARY

MENUS > POWER.

2. Depress and continue to hold the Power / Record button in its fully depressed position for a minimum

of 5 seconds. When the button is released, INITIATING CAMERA SHUTDOWN will display and camera

will power down.

After Power Down, the Power Status LED will illuminate Red, if an appropriate power source is available.