Technical data

Version 3.0

38 38

Also shows battery location and status on REDmote. In this case RM (Rear Module) B3 (Bay 3).

POWER shows installed batteries and state of charge.

EXTERNAL DC POWER

EPIC accepts input voltages between 11.5V - 17V D.C and can draw a maximum current of 12 Amps.

• An appropriate 150W supply with DC output rated at 15V 10A such as AC Power Adapter P/N 740-

0019 available from RED DIGITAL CINEMA.

• RED Charger. For RED Charger you must use 2B-to-1B Power Adapter Cable P/N 790-0138.

• RED BRICK® 140Wh batteries may be used with Backpack Quickplate, RED Quickplate, Battery Belt

Clip, or RED Cradle via 2B-to-1B Power Adapter Cable P/N 790-0138.

• 4-pin XLR DC power sources may be used with the camera via adaptor cable P/N 790-0164.