Technical data

Version 3.0

30 30

b. Rotate battery module down flush with the rear of the adaptor plate.

c. While applying steady pressure to hold the battery module against the adaptor plate, use a T-20

Torx to rotate the lock on the adapter plate clockwise to secure the battery module.

To remove the Quad Battery Module and Adaptor Plate:

1. Power down the camera if necessary.

2. Use a T-20 Torx to rotate the lock on the adapter plate to the Unlock position.

3. Rotate the battery module upwards and down to disengage lip at top of battery module from adaptor

plate.

4. Remove battery module from adapter plate.

5. Use a T-20 to loosen the screws attaching the adaptor plate the camera brain.

Rotate Lock Clockwise

Until Red Dot Lines Up

with Lock Icon

Press Battery Module

Flush with Adaptor