Technical data

Version 3.0

230 230

3. Install RED Focus™ to the camera PL mount.

A. Remove the camera lens or sensor cover if equipped.

B. Install RED Focus onto the camera in the position shown.

C. Ensure RED Focus is secured to the camera with the camera lock ring.

RED Focus Properly Installed on Camera

4. Power up the camera.

5. Power up RED Focus. Refer to POWER UP / DOWN.

NOTE: Remember that RED Focus will AUTOMATICALLY power down after 3 minutes. Press

the Red button on the front to power back up.

6. Set the camera to Magnify. Go to SECONDARY MENUS > SETTINGS > DISPLAY > FALSE COLOR

> MAGNIFY.

NOTE: The “Focus” option located under SECONDARY MENUS > SETTINGS > DISPLAY >

FALSE COLOR > FOCUS can serve as a good double-check for proper focus during this

procedure.

RED Focus Displayed Image on Camera – EPIC Shown, EPIC Similar