Technical data

Version 3.0

193

POWER DOWN

USING CAMERA

When the REDmote is connected to the camera and the camera is powered down, the REDmote will

also power down. When disconnected from the camera, the REDmote will not power down with the

camera.

USING REDMOTE

1. To power DOWN the REDmote, depress and hold the Power / Lock Switch in the Down direction

momentarily, then release.

2. A screen will display with options to power down the REDmote, the camera or both the REDmote

AND the camera together.

NOTE: Wireless connection shown above, when docked to camera, SHUTDOWN CAMERA will not

display.

3. Select the desired power down function.

NOTE: When not using the REDmote, for maximum battery storage life, use the Power / Lock

Switch to power down the REDmote completely by pressing down in the power off position and

using the displayed menu to shut down the REDmote and/or the REDmote and camera. Refer to

POWER UP / DOWN > POWER DOWN. If the Power / Lock Switch is pressed down in the power

off position and held until the REDmote powers down, the battery storage life will be reduced