Technical data

Version 3.0

187

3. On REDmote, press Soft Menu Button 3 under SETUP.

4. Ensure Wireless is On (REDmote will display the option “Turn Wireless Off”). If “Turn Wireless On” is

displayed, select it and press the Enter button. In addition, if Wireless is Off, REDLINK OFF will be

displayed.

NOTE: If wireless needed to be turned on you, will need to press Soft Menu Button 3 again to get

back into Setup options.

5. Select “Setup System” to display the Setup System screen. Note the 16-digit number near the

bottom of the screen.

6. On the camera go to SECONDARY MENUS > SETTINGS > SETUP > REDMOTE.

IMPORTANT: Ensure REDmote displays IDLE on the screen in the lower Left before continuing to

the next step.