Technical data

Version 3.0

181

Local

Allows you to control the camera setting directly on the REDmote as opposed to having to see the

setting on the LCD or external monitors to adjust. As the settings are changed, they will be reflected on

the camera LCD and external monitors, however the menus will not open on the camera as changes are

made.

NOTE: You can also enter local mode while in the REDmote is IDLE.

Customizing Available Adjustment Parameters

Local also gives you the options to setup what parameters you would like to be able to adjust directly,

using the REDmote. You can assign the parameters to one of the 5 pages of information available under

Soft Menu Buttons 4-8.

This feature allows you to put similar or frequently used setting together for ease of adjustment.

NOTE: You do not need to be connected (either wirelessly or wired) to setup the slot assignments.

To customize parameters:

1. Ensure camera is on and wirelessly connected to REDmote.

2. Press Soft Menu Button 2 to display LOCAL above Soft Menu Button 2.

3. Select the page you would like to set the parameter on. Refer to SOFT MENU BUTTONS 4-8.

4. Use the directional arrows on the Navigational Control to move the Red cursor to the desired

location to place the parameter.

5. Press Soft Menu Button 3 Setup. The Setup window will appear on screen.