Technical data

Version 3.0

166 166

HEADPHONE

A 3.5mm stereo jack provides two channels of adjustable level analog audio for monitor headphones.

Figure 21: Headphone Output Connector

PIN SIGNAL DESCRIPTION DIRECTION

A (TIP) LEFT Left channel audio Out

B (RING) RIGHT Right channel audio Out

C (SLEEVE) GND Camera ground --

The camera’s four audio channels may be monitored in pairs: either 1L - 2R or 3L - 4 R or as a quad mix

of 1+3L – 2+4R based on the MIX parameter. Default is 1L-2R.

Output volume may be adjusted as follows.

Volume: (master volume) Adjusts headphone volume equally for left and right outputs.

Range is -18dB to 0dB in 1dB steps. Default is -9dB.

NOTE: for maximum output signal quality, only use high impedance headphones.