Technical data

Version 3.0

136 136

BLACK SHADING (CURRENT FPS/EXPOSURE SETTINGS)

This option generates a calibration with the currently set frame rate/exposure. This can be used to

generate a calibration for long exposures. After calibration (Which takes about 10 min), the new map is

automatically selected.

BLACK SHADING PROCEDURE

The calibration procedures are the same for both BLACK SHADING options.

The calibration procedures are the same for both Black Shading (24 FPS @ 1/48 SEC) and Black

Shading (Current FPS/Exposure) options.

When selected, a screen will appear asking if you wish to proceed with Black Shading calibration.

REDmote will also display the following messages.

Black Shading calibration procedure:

1. Ensure the sensor is NOT exposed to the calibration light source by installing the lens cap properly.

2. Ensure a properly formatted SSD is attached to the camera and properly formatted.

3. Select OK to perform the Black Shading calibration. The calibration will make 2 passes.

4. A status screen will show progress of the Capturing step. Second pass shown.