Technical data

Version 3.0
©2011-2012 RED.COM INC. 955-0002_v3.0, REV-A
130 130
SYNC MODE
Allows the shutter timing (scan start) to be synced to an external signal.
Available options are OFF, GENLOCK, SHUTTER, INTERNAL, PROXY, and SLAVE. Default is Off.
OFF – Shutter start time is defined by internal camera timing.
GENLOCK – Shutter start time is slaved to an external RS170A tri-level sync signal .a.k.a “Genlock”.
SHUTTER – Shutter start time is slaved to an external Shutter Sync signal.
INTERNAL – Not implemented at this time.
PROXY – Not implemented at this time.
SLAVE – Not implemented at this time.
IMPORTANT: If Sync > Genlock mode is selected, DO NOT set fps to higher than 72fps, and to a
speed NOT a multiple of the project base rate and genlock input.