Technical data

Version 3.0

124 124

TARGET

Commands can either be sent to ALL devices, to NONE of the devices (So this device will only listen) or

to a specific TARGET (Which can either be the NAME of a specific device or a whole GROUP). This

allows for a lot of flexibility in bigger setups. For example on a 3D shoot with multiple rigs one can either

send commands to individual cameras (Set CAM_A_L to 1/64th exposure), to a group of cameras (Set

"RIG_A" to 48 FPS), or to all cameras (Start Recording on all cameras). It is important to note that with

the exception of the NONE setting, all filtering is happening on the receiver side.

When selected a keyboard will appear.

SERIAL PROTOCOL

EPIC can communicate to the outside world either via the Serial Port (RS-232, if RCP is selected as the

SERIAL PROTOCOL) or the Ethernet Port (Gigabit-Ethernet).

This menu allows the user to select the CTRL (RS232) Serial Port PROTOCOL. Available options are

NONE, ELEMENT TECHNICA, 3ALITY SPC 7100 and 3ALITY SPC 7000. Default is NONE.

NETWORK

If the Ethernet connection is used, additional settings are required. Each Device requires a unique IP

ADDRESS. (Technically, with the camera-to-camera cable using UDP this is not required but good