Technical data

Version 3.0
955-0002_V3.0, REV-A ©2011-2012 RED.COM INC.
121
• Eject Media
• HALF press request
• Menu Left
• Menu Right
• Menu Toggle
• No Action
• Shutter Sync
• False Color
• Next Value
• Previous Value
• Shutdown
• No Action
• Toggle AF Mode
• Exposure Check
• Toggle REDCode
• Zoom Stop
• Zoom In Speed 1
• Zoom In Speed 2
• Zoom In Speed 3
• Zoom In Speed 4
• Zoom Out Speed 1
• Zoom Out Speed 2
• Zoom Out Speed 3
• Zoom Out Speed 4
• Brain LCD Br. Up
• Brain LCD Br. Down
• Toggle ND Filter
• Open FPS List
• Open ISO List
• Open Aperture List
• Open Shutter Speed
List
• Open Color Temp List
• Open AF AE
• Record Start
• Record Stop
• Toggle SH backlight
• Menu Up
• Menu Down
• Rotary Next Value
• Rotary Previous Value
• Set focus mode for
still
• Set focus mode for
movie
• RAW Check
• Toggle HDR Mode
• Toggle Display Mode
• Toggle Color Space
• Toggle Zebra 1 Mode
• Toggle Zebra 2 Mode
• Toggle Zebra 1/2
Mode
• Toggle Shutter Mode
• Toggle Shutter Angle
Abs/Rel Mode
• Toggle TC Display
Mode
• Toggle Lens Ring
Mode
• Toggle Fan Mode
• One Shot AF
• Key Disabled
DATE / TIME
This menu allows the user to reset the battery backed up clock of the RED EPIC camera. These values
will be used to timestamp each recording as they are made to the RED MAG 1.8” SSD media.
NOTE: Enter time in 24-hour clock format. i.e. 2:35 pm should be entered as 14:35:00.
COMMUNICATION
Communication Menu allows you to set a NAME, GROUP, TARGET, set a SERIAL PROTOCOL,
ENABLE DHCP, C2C or EXT, set an IP ADDRESS, NETMASK, and/or GATEWAY. This function also
allows you to identify the camera (NAME). With the serial port or a direct link Ethernet cable (Via UDP)
only two cameras or devices can be connected, if the camera is connected to a hub or router multiple
cameras or devices can communicate.