Technical data

Version 3.0

116 116

LCD/EVF

Options are MENUS, PREVIEW, CLEAN, OVERLAY, 3D LEFT, and 3D RIGHT.

If anything other than MENUS is selected on the LCD (such as CLEAN), to return to displaying the

MENUS, perform a double-tap on the LCD screen.

HDMI

Options are OFF, MENUS, PREVIEW, CLEAN, OVERLAY, 3D LEFT, and 3D RIGHT.

RES

Allows you to choose the output resolution for HDMI monitors. Available options are AUTO, 720p and

1080p.

NOTE: Some HDMI monitors may have trouble when "AUTO" is selected. In these cases, it is

recommended to manually select the maximum monitor resolution provided.

HD-SDI

Options are OFF, MENUS, PREVIEW, CLEAN, OVERLAY, 3D LEFT, and 3D RIGHT.

RES

Allows you to choose the output resolution for HD-SDI monitors. Available options are AUTO, 720p and

1080p.

FREQ

Allows you to choose the output frequency in Hertz (Hz) for HD-SDI monitors. Available options are

AUTO, 23.976/24, 25, 29.976, 47.952/48, 50, and 59.94.

AUTOMATICALLY ASSIGN MENU SCREEN IF ENABLED

When checked will assign an attached external monitor to display the menus if none are selected.

TEST SIGNALS

Permits the video monitor outputs to be replaced with a video test pattern. Available test patterns are

CHIP CHART and SMPTE BARS.