Operating instructions

MINIMAG-OP-EN - 9 -
OPERATION CONTROLS - TRACTION
1. SPRAY JET [BLUE] (OPTIONAL): Activates Water Pump for remote Spray Wand
2. “ON-BOARD” SOAP SYSTEM [GRAY] (OPTIONAL): Dispenses soap directly to
the deck level
3. ECON TOGGLE SWITCH [GREEN] (OPTIONAL): Reduces power to give
machine a longer run time
4. KEY SWITCH: Turns power of the machine ON and OFF
5. LOAD TOGGLE SWITCH [ORANGE] (OPTIONAL): Engages different Scrubdeck
parameters for increased RPM for Stripping and Polishing
6. REVERSE SWITCH: Pull back for machine drive reverse
7. SQUEEGEE LIFT LEVER: Raises and lowers the Squeegee
8. MENU CONTROL: Scrolls through different options on the LCD display - there are
3 different screens it will scroll through
9. LCD SCREEN: Lists functions and settings of the machine
10. SOLUTION FLOW CONTROL TOGGLE [BLUE]: Push down (-) to reduce and
push up (+) to increase the solution fl ow
11. DOWN PRESSURE TOGGLE SWITCH [BLACK]: Controls the pressure to the
Scrubdeck - push up (+) for higher down pressure, down (-) for lower pressure
12. SCRUBDECK SWITCH: Raises and lowers the Scrubdeck
13. SPEED CONTROL KNOB: Controls the speed of the Traction Drive - Turn counter-
clockwise to reduce speed
14. EMERGENCY SHUT OFF SWITCH: Shuts OFF the machine in case of
emergency
15. HOUR METER: Hour meter to indicate complete time machine has been ON
16. RECHARGE CYCLE METER: Shows the amount of charges on a machine
17. MANAGER SOLUTION LOCKOUT (OPTIONAL): Allows ability to set
Solution Flow and then remove key to not allow changing of parameters
18. MANAGER DOWN PRESSURE LOCKOUT (OPTIONAL): Allows ability to set Down Pressure and
then remove key to not allow changing of parameters
19. CHARGER PORT: Red 50 used to receive charger input for Optional external charger
1
2
3
4
5
678 9101112
13
14
15
16
17
18
19