Operating instructions

MINIMAG-OP-EN - 7 -

LCD SCREEN MENU DISPLAYS:

** USE GREEN MENU SELECTION BUTTON ON CONTROL PANEL TO CHANGE SCREENS **

1. BATTERY LEVEL INDICATOR - Indicates the energy level remaining in the Batteries

(Shown on all menu displays)

2. SCRUBDECK DOWN PRESSURE GAUGE - Sets the down pressure on the Brushes / Pads

3. VACUUM ON - Indicates the Vacuum is ON

4. SCRUB MOTORS ON - Indicates the Brush Motors are “running”

5. KEY SWITCH HOUR METER - Indicates the total number of hours that the machine has been ON

6. SCRUB BRUSH HOUR METER - Indicates the total number of hours that the Brush Motors have been used

7. TRANSPORT HOUR METER - Indicates the total number of hours the drive system has been used

8. ERROR WARNING SYMBOL - Indicates when there has been a diagnostic code error

9. DIAGNOSTIC CODE - When the machine has detected an error, it will display the warning symbol and a diagnostic

code which tells you what’s wrong

10. WATER ON - Indicates the solution ﬂ ow is ON

11. SOLUTION LEVEL - Indicates the gallons per minute (GPM) 0 - 1.0

SCREEN #1 (OPERATOR) SCREEN #2 (MAINTENANCE)

SCREEN #3 (WITH ERROR CODE)