Operating instructions

MINIMAG-OP-EN - 29 -
MINIMAG PM RECORDS
CUSTOMER INFORMATION
CUSTOMER EMAIL
ADDRESS PHONE
CITY STATE ZIP CONTACT
MACHINE INFORMATION
MODEL #: SERIAL #:
WORK ORDER#: HOUR METER (Key):
CHASSIS HOUR METER: HOUR METER (Traction):
RE-CHARGE COUNTER: HOUR METER (Scrub):
ISOLATOR HOUR METER: HOUR METER (Vac):
NOTE: Isolators need to be replaced on Scrubber Machines at 1000 Hours or Annually
BATTERY CONDITION CELL 1 CELL 2 CELL 3 CELL 4 CELL 5 CELL 6
BATTERY 1 HYDROMETER
BATTERY 1 ELECTROLYTE CLARITY
(Clear, Cloudy, Particulate, Dark)
BATTERY 1 WATER LEVEL
(Overfi lled, Full, Low, Dry)
BATTERY 2 HYDROMETER
BATTERY 2 ELECTROLYTE CLARITY
(Clear, Cloudy, Particulate, Dark)
BATTERY 2 WATER LEVEL
(Overfi lled, Full, Low, Dry)
CLEAN BATTERY TOPS. CHECK BATTERY CABLE AND TERMINAL CONDITION.
NOTES:
PAD/BRUSH CONDITION
SCRUB BRUSH FIBER LENGTH ROTATED BRUSHES
BROOM DRIVER SOCKETS (4) GOOD WORN NEEDS REPLACEMENT
DRIVER IDLER HUBS GOOD WORN NEEDS REPLACEMENT
SIDE BROOM CONDITION GOOD WORN NEEDS REPLACEMENT ROTATED SIDE TO SIDE
DISK PAD DRIVER GOOD WORN NEEDS REPLACEMENT
EDGE/ORBITZ PAD GRIP FACE GOOD WORN NEEDS REPLACEMENT
CHECK OPERATION AND CONDITION OF: IN SPEC REPAIR PROBLEM
KEY SWITCH (OPTIONAL)
LCD DISPLAY
PAGE BUTTON
BRUSH PRESSURE TOGGLE
MANAGERS LOCK OUT
REVERSE SWITCH
BRUSH SWITCH
SOLUTION +/- SWITCH
SOLUTION SOLENOID
LOW SOLUTION LIGHT
BRUSH DECK LIFT SYSTEM
BRUSH MOTORS
VACUUM SWITCH
VACUUM MOTOR PERFORMANCE
OFF-BOARD VAC SWITCH