Owner Manual

1
Attach Fire Screen Handle
A
to Fire Screen
B
using Nut
H
. Securely tighten.
Hardware Used: H Nut (M6) x 1
2
Attach the Grate Brackets
E
to the inside of the Fire
Bowl
C
: insert a Bolt
I
into one of the small holes
near the rim of the bowl. Slide the eyelet of a Grate
Bracket onto the Bolt and secure with a Nut H. Repeat
to install remaining 3 Grate Brackets.
Hardware Used: I Bolt (M6x12) x 4
H Nut (M6) x 4
3
Attach each Leg
F
to the outside of the Fire Bowl
C
by
inserting 2 Bolts
I
through the eyelets near the bottom of
the Fire Bowl into the threaded holes of the Leg. Repeat to
install remaining 3 Legs.
PREPARATION
Place all parts on a soft, level surface for assembly. You will need a screwdriver for assembly.
Estimated Assembly Time: 30 Minutes | DO NOT over tighten hardware!
2
3
ASSEMASSEMBLbl YY
Hardware Used: I Bolt (M6x12) x 8
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are missing,
please contact Customer Service or email.
5