Owner Manual

Step 2
Step 3
Install the first Leg(B) into the bottom of the Ottoman by placing one
Gasket(①) on the threaded stem.
The use of the Gasket can improve tightness and security of Leg.
Tighten by turning the Leg clockwise.
Repeat the same step to install the three remaining Legs(B).
Note : The use of Gaskets are OPTIONAL and are especially useful to
help alleviate slight wobbles. Some Legs may need more than one
whilst some Legs do not require any.
Stand the Ottoman right side up, test for levelness on a flat surface.
Where you find this Ottoman being uneven, identify the corresponding
Leg and "add or remove" a Gasket to achieve evenness.
Your Ottoman is ready for use.
Caution: This Ottoman can only be used on a flat, level surfaces.