Top Assembly Instructions Granite Top PART LIST W3. Top 1 pc. HARDWARE LIST X. Top Support 2 pcs. Head Cap Bolt 6 pcs.
Top Assembly Instructions STEP 1 Put Top Support (X) into the pre-drilled holes, using Head Cap Bolts to attach it to the unit. X X Head Cap Bolt W3 STEP 2 Place Top (W3) onto the unit, then tighten up all Head Cap Bolts. Head Cap Bolt Figure 2 Figure 1 STEP 3 Attach Pull Handles to Door (S) and (T), using Machine Screws. (See figure 1) Attach Door (S) and (T) to Side Panel (A) and (B), slide the door lift hinges into the side panel lift hinges. (See figure 2) Slide Drawers (U) and (V) into place.
Top Assembly Instructions Granite Top
Top Assembly Instructions Steel Plate Connector Head Cap Bolt (short) W3 Steel Plate Connector Flat Washer Spring Washer Head Cap Bolt (short) (Figure 1) STEP 1 Remove Drawers from the unit. Place the selected ‘Top’ on the unit, attach it to the body with the Steel Plate Connectors, Flat Washers, Spring Washers and Head Cap Bolts. (See figure 1) Slide the Drawers into place.
Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. PART LIST C. Middle Panel 2 pcs. B. Side Panel 1 pc. H. Back Stretcher 1 pc. E. Back Panel 2 pcs. I. Front Stretcher 1 pc. J. Base 1 pc. P. Adj.
Assembly Instructions 2/3 IMPORTANT Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future. STEP 1 Attach four Casters to the Base (J) with Wood Screws. G (See the ‘Arrow’ sticker indicating front area on the base.) G C STEP 2 C Attach the Side Panel (D) to the Base (J). D J Tighten Head Cap Bolt only half way.
Assembly Instructions 3/3 Head Cap Bolt STEP 4 Attach the Side Rack (R) to the Side Panel (B) with the Head Cap Bolt. B Attach the Brush Chrome Pipes (U) to the pre-drilled holes of Side Rack (R). R Attach the Base Rack (T) to the Side Rack (R). T S Attach the Side Rack (S) to the Side Panel (B), using Head Cap Bolt. U STEP 5 Install the Doors (K) and (L), using Spring Pin Hinge. (See figure 1) Assemble the Door Pull Handles, using the Machine Screws.
N3 N2 N5 N4 N1 Drawer (N) UNIT PART LIST HARDWARE LIST N4. Side Part 2 pcs. N1. Front Part 2 pcs. N2. Back Part 2 pcs. 1 Wood Screw /2 ” (for Bottom Part) 12 pcs. Pull Handle 2 pcs. N5. Bottom 2 pcs. N3. Side Part 2 pcs. Wood Screw 1” (for Side Part) 16 pcs. Machine Screw for Pull Handle 4 pcs. Assembly Instructions Figure 1 N1 N4 Line up Side Parts (N3) and (N4) to the Front Part (N1) and Back Part (N2). Be sure to follow the ‘Arrow’ sign sticker on the parts.
PART LIST HARDWARE LIST W. Top 1 pcs. X. Top Support 2 pcs. Head Cap Bolt 6 pcs. (+1 extra) Attention ! This Top can be used for both kitchen cart series. Top Assembly Instructions Steel Plate Connector Head Cap Bolt (short) A Steel Plate Connector Flat Washer Spring Washer Head Cap Bolt (short) (Figure 1) STEP 1 Now, you’ll be able to create your own kitchen cart. Make your own choice of the ‘Top’, wood or stainless steel or granite. Remove Drawers from the unit.
