Installation & Assembly

Hardware List

Leg

4 pcs.

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Top

1 pc.

Bolt

8 pcs. (+1 extra )

Flat Washer

8 pcs. (+1 extra )

Spring Washer

8 pcs. (+1 extra )

Part List

Bistro Table

Cottage Oak Finish

Key Wrench

1 pc.

PAGE 1
Bistro Table Cottage Oak Finish IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Top 1 pc. B. Leg 4 pcs. Hardware List Key Wrench 1 pc. Spring Washer 8 pcs. (+1 extra ) Flat Washer 8 pcs.
PAGE 2
Assembly Instructions 2/2 IMPORTANT * Do not tighten up all the bolts until each part is properly assembled. * You should keep Key Wrench in a safe place as you may need to tighten up the Bolts in the future. Flat Washer Spring Washer Bolt Key Wrench Figure 1 B B B B A STEP 1 Turn Top (A) upside down and place on a soft cloth. Attach Legs (B) to Top (A) with Flat Washers, Spring Washers and Bolts (see Figure 1). Turn the table over to its’ upright position.