Owner Manual

Page 4 of 6
Step 3
Stand the Stool Frame up and place Seat(A) onto the Stool Frame.
To affix the Seat to the Stool Frame, carefully lay down the Bar Stool and
align the Mounting Position of the Stool Frame to the Mounting Positions at
the Seat(A).
Insert Screws(G) through the Mounting Positions with Allen Key(H) and
slightly tighten the Screws.
Then stand the Bar Stool up. Check both sides of Seat(A) are flush with
the Stool Frame and tighten the Screws(G) sequentially.
If no wobbles found, proceed to tighten all the screws.
CAUTION : When tightening these screws, tighten sequentially.
DO NOT tighten any screw fully and then towards the next one.
This would cause the Stool Frame to warp.
If there is still wobbles, loosen the screws and execute this same drop
tests.
WARNING!! IF CHAIR IS NOT STABLE , IT COULD LEAD TO
DAMAGING THE PRODUCT.