Assembly Instructions

I 5
K 11
L 7
M 1
Hard ware
Long Screws (M7x90mm)
Allen Key
Assembly Step
Medium Screws (M6x50mm)
Short Screws (M6x25mm)
Unpack and place all parts on a clean, non-marring surface.
CAUTION : This panel must be held in position whilst the SIDE PANELs are being
attached.
Page 3 of 8
Place the Base Stand(G),right side up.
Align and insert Front Panel(B) into Base Stand(G) by inclining the corner, as
pictured above.
Then, gently slide the entire Front Panel(B) into this slot housing.