ASSEMBLY INSTRUCTIONS Product Dimension: 19”Wx24.5"Dx40.5" H Cube Size : 42.2”x18.6”x14.5” NW: 24.
BEFORE ASSEMBLY Thank you for purchasing our product. This product has been designed for easy assembly and long lasting use. Please take the time to read and follow the assembly instructions carefully Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO 1 3 5 7 Description Long bolt (M6x80mm) Short bolt (M6x40mm) Qty Sketch NO 4 2 2 4 10 6 Flat Washer (∅6.5x19) Dowel (∅10x30) Description Medium bolt (M6x60mm) Qty Sketch 4 Lock Washer (∅6.5x9) Allen Key 10 1 (4mm) 1 STEP 1 Remove bottom out seat frame (c) as shown below.
STEP 2 Attach frame (B) to the back (A) by using bolts (3) and (1) and washers (4) and (5). Tighten with Allen Key (6). Squeeze frame seat and Chair back when assembly Note: DO NOT tighten any of the bolts, until the chair is assembled. STEP 3 Attach front legs (C) to the seat frame. Use bolts (2), washers (4) and (5).Tighten with Allen Key (6). Attach bottom removed on the step 1 on seat frame. .
STEP 4 Put the chair on a flat level surface to make sure the chair is level and then tighten the all bolts.
