Caution : You must read this before you proceed. Queen Size Bed NOTE : This Bed is NOT a TOY. Keep your child / children at bay during the assembly process. The BED is HEAVY. To prevent injury to yourself or damage to the product a minimum of two adults are required whenever moving or lifting the product. No.
D Headboard Right Foot 1 E Side Panel 2 F Footboard 1 G Cross Slat With Mounting Position 2 H Cross Slat Without Mounting Position 9 I Vertical Slat 1 J Support Foot for Vertical Slat 3 K Footboard Foot 2 Page 2 OF 9
No. Picture Description Qty ① Bolt (M8x45mm) 9 ② Spring Washer 7 ③ Washer 9 ④ Allen Key 1 Before Beginning Assembly: Unpack and place all parts for clear visibility. Pack A: Hardware for assembly of Bed. Comment:Have provided one more of bolt ,washer, spring washer and screw.
OVERVIEW Headboard(A) Headboard Panel(B) Headboard Right Foot(D) Cross Slat with Mounting Position(G) Headboard Left Foot(C) Side Panel(E) Vertical Slat(I) Support Foot for Vertical Slat(J) Cross Slat without Mounting Position(H) Footboard Foot(K) Cross Slat with Mounting Position(G) Footboard (F) Footboard Foot(K) This Bed has multiple parts and may require up to 60 minutes to assemble.
1.1 - Place the Headboard(A), Headboard Panel(B), Headboard Left Foot(C) and Headboard Right Foot(D) into the position as shown. 1.2 - Align the Headboard Left Foot(C) and Headboard Right Foot(D) onto the Headboard(A) and Headboard Panel(B) by using Bolts(①), Spring Washers(②), and Washers(③) with Allen Key(④). First tighten the four Bolts on the Headboard(A), then tighten the Bolts on the Headboard Panel(B), in a sequential manner.
Step 4 C E A B E C D F K K Attach Side Panel(E) to Headboad Left Foot(C) and Headboad Right Foot(D) by sliding the iron plates onto the Bolts as shown. Step 5 I 5.1 Labelled "Face Up" 5.2 J I I 5.
5.1 - Place the Vertical Slat(I) with “Face up" label down. 5.2 - Attach Support Foot for Vertical Slat(J) to the bottom of Vertical Slat(I) by inserting the threaded stem in the Foot and turning clockwise until secure. 5.3 - Stand the Vertical Slat upright. Step 6 6.1 E G A D F B C 6.2 E G G K A ④ D F B C G I E G ① ③ K 6.1 - Put the Cross Slats(G) into the grooves of the Side Rails(E). 6.
Step 7 H E A D E F B C G I H G K Put the Cross Slats(H) into the grooves of the Side Rails(E). Step 8 Ensure that all Bolts are secured at all joints. Your Bed is ready for use. This Bed can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
