Installation & Assembly

page 1 of 2
48" Round Aluminum Dining Table with Alum Slat Top
Assembly Instructions
READ AND SAVE THESE INSTRUCTIONS
Step 1: Remove all protective materials and check all component pieces against
parts list.
Step 2: Place the table top (A) upside down on a flat surface to start assembly.
Step3: Attached Table Legs (B)to Table top (A) using
Bolt(D)through washer(F) ,as shown in Photo 1.
Important :DO NOT TIGHTEN BOLTS AT THIS POINT
Step4: Align the bolt holes in the leg connector ring (C) with those on the
Table legs (B). From the inside of the leg connector ring (C), loosely attach
Leg (B) to the leg connector ring (C) using bolts (E) through washers (F) in
Photo 2.
Step 5: Tighten all of bolts and Cover all bolts (D) /(E)with bolt covers (G)
With the help of another person, carefully turn the table to the upright
position in Photo 3.
The table is ready for your enjoyment.
photo 1
Photo 3
photo 2