7 Piece Dining Set 1
FOR REPLACEMENT PARTS OR HELP WITH ASSEMBLY PLEASE CONTACT US PLEASE ENSURE TO HAVE THE MODEL # FROM THE PACKAGING OR INSTRUCTION BOOKLET TO RETURN THE PRODUCT: PLEASE CONTACT THE RETAILER WHERE THE ITEM WAS PURCHASED FROM 2
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
66 x 40 INCH RECTANGULAR DINING TABLE 4
PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION A B TOP QTY 1 LEG QTY 4 NEED HELP? For help with assembly or if you are missing a part, please call our customer service.
PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 1 2 ALLEN KEY BOLT M8 X 70 mm QTY 8 SETS ALLEN KEY QTY 1 NEED HELP? For help with assembly or if you are missing a part, please call our customer service.
COMPONENTS – KEY DIAGRAM B B B B A 7
ASSEMBLY STEP 1 B B B B A 1. Attach Legs B to Top A . 2. Use 8 Allen Key Bolts 1 to secure part A and B . 3. Use Allen Key 2 to tighten Allen Key Bolts. Do not over-tighten.
ASSEMBLY STEP 2 Note: Levelers on bottom of legs can be adjusted if floor is uneven.
2 PACK PARSON CHAIR 10
PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION 1 3 2 CHAIR BACK QTY 1 SEAT CUSHION QTY 1 FRONT LEG QTY 2 NEED HELP? For help with assembly or if you are missing a part, please call our customer service.
PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION A C B ALLEN KEY SCREW M8 X 40 mm QTY 1 D ALLEN KEY SCREW M8 X 60 mm QTY 4 F E ALLEN KEY QTY 1 ALLEN KEY SCREW M8 X 80 mm QTY 4 WOOD DOWEL 8 X 30 mm QTY 2 WASHER QTY 9 G LOCK WASHER QTY 9 NEED HELP? For help with assembly or if you are missing a part, please call our customer service.
ASSEMBLY STEP 1 E D 2 A 2 G F 1 Insert Dowels (E) into pre-drilled holes on Seat Cushion (2). Attach Seat Cushion (2) to Chair Back (1) using Allen Key Screw (A), and one Washer each of (F) and (G). Use Allen Key (D) to tighten. Do not over-tighten.
ASSEMBLY STEP 2 2 D C G F 1 Secure Seat Cushion (2) to Chair Back (1) using Allen Key Screw (C), and four Washers each of (F) and (G). Use Allen Key (D) to tighten. Do not over-tighten.
ASSEMBLY STEP 3 2 3 1 D B G F Attach Front Legs (3) to Seat Cushion (2) using Allen Key Screw (B), and four Washers each of (F) and (G). Use Allen Key (D) to tighten. Do not over-tighten.
ASSEMBLY STEP 4 Attach fabric with velcro to bottom of seat.
ASSEMBLY STEP 5 Turn Chair right side up.
WARRANTY Thank you for purchasing our products. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. We reserve the right to repair or replace the defective product, at its discretion. This product is guaranteed for 12 months if used for normal purposes.
