Assembly Instructions Retain this manual for future use.
Parts & Tools PART QTY A 1 PICTURE & DESCRIPTION PART QTY AA 8 BB 8 CC 8 M10 Flat Washer Table Top B 4 C 4 Table Leg PICTURE & DESCRIPTION Plain Washer Screw Nut Leg Support DD 4 EE 1 Leg Cap Socket Wrench WARNING: To avoid damage of your new patio furniture, please use either the carton or another soft surface such as carpet as a working surface to prevent product damage during assembly.
Table Assembly Step 1: • Insert the screw nuts (CC) into the 4 leg supports (C). Step 2: • • • Place the table top (A) upside down on a soft surface. Insert the leg support (C), M10 flat washer (AA) and a plain washer (BB) into the holes through the table top (A). Tighten with the socket wrench (EE). Repeat for the other three leg supports (C). Step 3: • • Insert the table legs (B) into the table top (A).
Table Assembly Step 4: • Insert the leg caps (BB) into the holes on the table legs (B). Hand tighten the leg caps (BB). Step 5: • Turn the table right side up.
Opening Table Step 1: • Open the lock catch counter -clockwise under table top (A) as shown. Step 2: • Push the table top open from both sides. Step 3: • Push the middle of table top to lift it up.
Opening Table Step 4: • Push the middle of table top to right side till it is on supporting tube. Step 5: • Push right and left sides of the table top to middle table top segment. Step 6: • Open the lock catch clockwise under table top (A) as shown.
Closing Table Step 1: • Open the lock catch counter-clockwise under table top (A) as shown. Step 2: • Push the table top open from both sides. Step 3: • Push the middle of table top to lift it up.
Closing Table Step 4: • Push the middle table top to lower left corner until it’s on middle supporting tube. Step 5: • Push the right and left table top segments to middle table top segment. Step 6: • Open the lock catch clockwise under table top (A) as shown.
To expedite any future warranty claims, please retain the instruction sheet, warranty card and receipt for future use. Care and Maintenance Store furniture in an upright position. Be careful to never allow water to build up in frames as this will cause corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and water. Rinse with clean water and dry with a soft absorbent cloth towel.
1-Year Limited Warranty Program For a period of one (1) year after date of purchase, the Manufacturer will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between the Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase. Replacements under this warranty revert back to the date of original purchase for future warranty.
